You may connect a set of stereo headphones, not included, to this jack for private listening without disturbing others. Make sure that the plug from your headphones is fully inserted into the headphone jack. If the plug is not fully inserted the sound may be intermittent, or you may only hear sound from one side of the headphones. Then connect the headphones, put them on, and very gradually increase the volume to a comfortable listening level.
Remember that CDs may contain both very soft and very loud passages. Adjust the volume to a comfortable level using a louder passage, so that you always know what the maximum level will be. The system should be placed on a stable, level surface such as a table, shelf, or stand, convenient to a V 60Hz AC outlet, out of direct sunlight, and away from sources of excess heat, dust, moisture, or vibration.
The speakers may be separated from the main as far the wires allow for maximum stereo separation, or the may be placed to the immediate left and right of the main unit. This system is designed to operate on V AC 60Hz house current only. Connecting this system to any other power source may cause damage to the system and such damage is not covered by your warranty.
The plug will only fit into matching polarized AC outlets. This is a safety feature to reduce the possibility of electric shock. If the plug will not fit in your AC outlets, you probably have outdated non-polarized outlet. You should have your outdated outlet changed by a qualified, licensed electrician.
Do not file the wide blade on the plug, or use an adapter to make the plug fit into your outlet. This defeats the safety feature and could expose you to electric shock. This model is equipped with non-skid rubber feet to prevent the product from moving when you operate the controls.
These feet are made from non-migrating rubber material specially formulated to avoid leaving any marks or stains on your furniture.
However certain types of oil based furniture polishes, wood preservatives, or cleaning sprays may cause the rubber feet to soften, and leave marks or a rubber residue on the furniture.
To prevent any damage to your furniture we strongly recommend that you purchase small self-adhesive felt pads, available at hardware stores and home improvement centers everywhere, and apply these pads to the bottom of the rubber feet before you place the product on fine wooden furniture. STOP Button. Most of the main functions of this system can be operated by the controls on the front panel of the main unit, or by the buttons on the remote control handset.
If a specific function can only be operated by the remote handset, or by the front panel controls, this will be clearly indicated in the instructions. When operating this system with the remote control handset make sure that the IR Infrared transmitter on the front of the remote handset is pointed at the remote sensor on the front panel of the main unit.
The effective operating range of the remote control is approximately 15 feet. Please note that bright sunlight or room lighting may interfere with the remote control operation. If the remote is not operating properly try reducing the brightness of the room or moving closer to the main unit. If this does not solve the problem, it may be time to change the remote control battery. The Volume Level Indicator will appear on the display when you change the volume level.
The preset equalizer allows you to adjust the sound characteristic for the most popular types of music. Press the EQ button on the remote control to cycle through the following equalizer settings:. The appropriate EQ indicator briefly appears in the display to confirm your selection. Press the DBBS button on the remote control to increase the bass response.
Press again to cancel the Bass Boost function. Press the MUTE button on the remote control to shut off the speakers temporarily, for example, to answer the telephone. Press the MUTE button again to cancel the mute function and restore the sound.
The clock can only be set with the Remote Control. Just the Hour digits will continue flashing. The Minute digits will begin flashing. An AM or FM frequency will appear on the display.
Use the Manual Tuning method to tune to weak or distant stations that are not strong enough to be recognized by the Automatic Tuning system. The Tuner will search up or down the band for the next strong signal and stop on that station. Repeat this procedure until the tuner stops on your desired station. The display lighting goes off and the display changes from radio frequency to correct time. You may also have to vary the direction of this antenna until you find the position that provides the best reception.
Adjust the position of the loop aerial until you find the position that provides the best reception for your favorite AM stations. Using either the manual or automatic tuning method described on page 17, tune to the first station you wish to memorize Example: FM Tune to the next station you wish to memorize Example: FM Playability may also be affected by the quality and condition of the blank media you use for recording.
This is not an indication of any problems with your player. After reading the disc the display will show the total tracks and playing time.
The reading time may be even longer if you are using CD-RW rewritable discs. This is normal and not an indication of any problem with your unit. Playback will continue until all tracks on the disc have been played, then the player stops and the display shows the total tracks number and playing time on the disc. To stop playback at any time, press the STOP button. Playback will begin on the selected track. Normal speed playback will resume at that point. The Repeat function in this system allows you to continuously repeat a single track, or the entire disc.
The Repeat function can be activated during playback or while the player is stopped. The indicator appears in the display and the selected track will be repeated continuously. The ALL indicator appears in the display.
All tracks on the disc will be repeated continuously. The Random playback feature allows you play all the tracks on the disc in random order. You can select random playback while the disc is playing or when the player is stopped. The player will randomly select a track from the disc and begin playback. Random playback will continue until all tracks have played once, then the player stops. The RNDM indicator disappears and normal playback will resume from that point.
This feature allows you to play just the first 10 seconds of each track on the disc. This may be useful when you are trying to locate a specific song but you do not remember the title. Load the disc as usual and wait until the display shows the total playing time and number of tracks. When the first 10 seconds of the last track has played the player stops and the display again shows the total playing time and number of tracks on the disc. The Programmed Playback feature allows you to program a total of up to 64 tracks in any desired order.
You may program the same track to play several times within a program sequence if desired. Note : You cannot program tracks during playback. If a disc is playing press the STOP button first to stop playback before beginning the programming steps below.
Load the disc in the player and wait until the player has read the Table of Contents of the disc. Repeat steps 3 and 4 selecting the desired Track number each time until you have entered up to 64 tracks in the CD program memory. The PRG indicator remains on. The player will play all the tracks that you programmed in the desired sequence.
You can use the Programmed and Repeat Playback functions together to continuously repeat a programmed sequence. The programmed sequence will be repeated continuously. This is normal and not an indication of any problem with your player. To skip quickly from a track in one directory to a track in another directory, proceed as follows:.
Select the track to be repeated and start playback as usual. The indicator appears and the selected track will be repeated continuously.
The ALL indicators appear on the display and all the tracks on the disc will be repeated continuously. Select the directory to be repeat playback as usual.
Both the and ALBUM indicators appear in the display and all the tracks in the directory will be repeated continuously. The player will play the first 10 seconds of each track on the disc. For example in the illustration the disc contains 9 Albums and 56 Tracks.
The Search symbol will flash in the display and. The display will show the first song title beginning with the letter A. The display will show the name the Album. The player will read the information on the card and the display will show the total number of. Playback will continue until the last track has played and then the display will again show the total number of tracks, albums on the card.
You may also press the STOP button to stop playback at any time. To remove the card from the card reader, gently pull the card straight out from the slot. The reader indicator goes off. Return your flash memory card to its protective storage case.
It may be possible to convert your music to one of the playable compressed formats, or burn it to an audio CD, depending on the DRM restrictions.
Connect your portable USB storage device to the USB port on the front panel of this system as shown in the illustration. Note : The portable USB drive can only be connected one way, usually with the printed side facing up. This may damage the connector. Instead turn the device over and try. The player will read the information on the external device and the display will show the total number of 'tracks' or files on the device.
Playback will continue until the last track has played and then the display will again show the total number of tracks, albums on the USB device. If you are finished listening remove the external device from the USB port and return it to its protective storage case.
When connecting an iPod to this micro system, please ensure that the correct adaptor plate is used. This unit comes with 4 removable dock adapters to ensure the iPod fits properly in the dock on the top of the system. Refer to the compatibility table below and select the correct dock adapter for the iPod.
Using the correct adapter ensures the proper fit for your iPod and helps to reduce the stress on the connector when operating the iPod. Carefully align and then gently insert the iPod into the dock.
Note: Please make sure you are using the correct insert for your iPod and that it is properly docked into this unit. When an iPod is inserted into the dock, it will go to standby mode then turn off. Whilst the iPod is docked in the system, it will recharge until fully charged. This will present damage to the product due to lightning and power-line surges. POWER LINES -An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or other electric light or power circuits, or where it can fall into such power lines or circuits.
When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. Never spill liquid of any kind on the product.
Refer all servicing to qualified service personnel. Adjust only those controls that are covered by the operating instructions as an improving adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation.
Unauthorized substitutions may result in fire, electric shock or other hazards. HEAT - The product should be situated away from heat sources such as radiators, heat registers, stoves or other products including amplifiers that produce heat. Do not pull the power cord. The unit cannot be used until being checked by experts. Laser rays employed by the unit may damage eyes. Any servicing should be done by qualified service personnel.
If there is dust on the pickup, use a cleaning disc to clean it. Refer to the operation instructions of the cleaning disc you bought.
In these cases, the unit will not work. Unloading the disc and leaving the unit on for about one hour will evaporate the water, allowing the unit to function normally again.
Never use abrasive paper, polishing powder or any solvent such as alcohol or gasoline. Attempting to do so may damage the unit. Attempting to use these formats without the proper adapter may cause damage to the memory card or the unit. Do not attempt to insert these cards without the proper adapter.
Attempted use of these unsupported formats may cause damage to the memory card or the unit. MP3 file name requires MP3 or mp3 as an extension. Chinese characters cannot be displayed, although files featuring them can be played. The ability of this unit to play certain recordable discs may depend on the quality or physical condition of the disc, the quality of the recording, or characteristics of the recording device or software application.
Playback cannot be guaranteed in all situations. A DualDisc is a two sided disc product which mates DVD recorded material on one side with digital audio material on the other side. However, since the audio material side does not conform to the Compact Disc CD standard, playback on this product is not guaranteed.
The region code on the label of some DVD discs indicates which type of player can play those discs. SOme DVD discs may have not region code label even though their playbac is prohibited by area limits. Refer to section System Setup for details.
Do not touch the surface. Please be sure to read this manual carefully and completely to make sure you understand all of the exciting features and functions included in your new system. We have taken great care to make sure that this system was in perfect working order when it left our factory.
If you experience any problem with the set-up or operation of this system please refer to the back of this manual for instructions on obtaining customer service. The serial number of your system is located on a label on the back panel.
Please take a moment now to locate the serial number and to write it in the space provided below for future reference. You may be asked to provide this number if you call for customer service. This is the only sure way to protect the unit from damage in transit. If you do dispose of the carton and packing materials, please do so property. We care about our environment. Do not remove any labels or stickers that may be affixed to the back panel of the main unit of the speakers. Connect the right and left speaker cords to the speaker jacks as shown below.
Make sure to connect red to red and black to black. For good picture quality, use a composite RCA-type, included video cable to connect. If your TV has component video inputs, you will get the best picture quality using a component video cable. Connecting this system to any other power supply could result in damage to the unit which is not covered by your warranty. Welcome to ManualMachine.
0コメント